Expert Support
Full Speed
100% Working
Hangcha A Series 1.0t-1.2t CDD10-AMC1 to CTD12-AMC2 Operation Maintenance Manual 2022 EN
30 USD
- Description
Description
Contents:
Part â… ï¼šOperation And Maintenance
1 Notice For Use
1.1 General
1.2 Use As Required
1.3 Normal Service Condition
1.4 Attachment Installation Or Modification To The Truck
2 Truck Introduction
2.1 General
2.2 Main Part Introduction
2.3 Display And Control
2.3.1 Display
2.3.2 Control
2.4 Standard Technical Data
2.5 Product Plates And Warning Labels Location
3 Safety Instructions
4 Transport
4.1 Lifting By Crane
4.2 Securing The Truck During Transport
4.3 How To Remove A Broken Truck
5 Battery
5.1 Safe Operation Rules For Battery Use
5.2 Maintenance Of The Battery
5.3 Battery Charging
5.3.1 Power Interface
5.3.2 Battery Charging Steps
5.3.3 Check Charging State
5.3.4 Additional Charge
5.4 Replacing Battery
6 New Truck Breaking-In
7 Operation
7.1 Check Before Operation
7.2 Start Up
7.3 Travelling
7.4 Braking
7.5 Steering
7.6 Stopping
7.7 Loading
7.8 Unloading
7.9 Parking
8 Deposit The Truck For Long Time
8.1 Deposit For Long Time
8.2 Start Running After Deposit For A Long Time
9.1 Maintenance General
9.2 Periodic Maintenance Schedule
9.3 Truck Used Oil And Lubrication
9.4 Replace Hydraulic Oil
9.5 Replace Wheels
9.5.1 Replace Drive Wheel
9.5.2 Replace Load Wheels
9.5.3 Replace Auxiliary Wheel
9.6 Replace The Key Safe Parts Periodically
10 Relevant Safety Directive Or Standard (Ce)
Part Ⅱ:Structure, Principle And Maintenance
1 Drive Unit
1.1 Drive Unit Structure And Principle
1.2 Dismantle Drive Unit From The Truck
1.3 Assemble And Use Notice
1.4 Fault And Troubleshooting
1.5 Drive Motor
1.6 Electromagnetic Brake
1.5.1 Electromagnetic Brake Working Principle
1.5.2 Electromagnetic Brake Installation
1.5.3 Maintenance
1.5.4 Adjust The Air Gap Of The Brake
1.5.5 Common Fault And Troubleshooting
2 Hydraulic System
2.1 Hydraulic System Working Principle
2.2 Hydraulic Unit
2.3 Hydraulic Unit Dismantle
2.4 Dismantle The Lifting Cylinder From The Truck Or Replace
2.5 Hydraulic System Fault Diagnosis And Correction
3 Electric System
3.1 Electrical Schematic Diagram
3.2 Drive Motor Controller
3.2.1 Maintenance
3.2.2 Fault Code Table
Attachment:Table For Bolt’s Tightening Torque












