- NEWS UPDATE 06.2026 - [HOT] How To Discount - How To Pay By Visa Through Paypal - [HOT] Remote Service Support Program - How to Payment and Delivery - Exchange Manual & Software -
Home » Products » Forklift Manual » Haulotte » Haulotte Articulating Boom Lift HA32RTJ PRO to HA130RTJ PRO Operators Manual 4000390440 07.2013 EN

Haulotte Articulating Boom Lift HA32RTJ PRO to HA130RTJ PRO Operators Manual 4000390440 07.2013 EN

Haulotte Articulating Boom Lift HA32RTJ PRO to HA130RTJ PRO Operators Manual 4000390440 07.2013 EN (1)
Haulotte Articulating Boom Lift HA32RTJ PRO to HA130RTJ PRO Operators Manual 4000390440 07.2013 EN (2)
Haulotte Articulating Boom Lift HA32RTJ PRO to HA130RTJ PRO Operators Manual 4000390440 07.2013 EN (1)
Haulotte Articulating Boom Lift HA32RTJ PRO to HA130RTJ PRO Operators Manual 4000390440 07.2013 EN (2)
✓

Expert Support

✓

Full Speed

✓

100% Working

Haulotte Articulating Boom Lift HA32RTJ PRO to HA130RTJ PRO Operators Manual 4000390440 07.2013 EN

Size: 21.24 MB
Format: PDF
Language: English
Brand: Haulotte
Type of Machine: Articulating Boom Lift
Type of Manual: Operators Manual
Model: Haulotte HA32RTJ PRO, HA100RTJ PRO, HA41RTJ PRO, HA130RTJ PRO Articulating Boom Lift
Part Number: 4000390440
Publication Date: 07.2013
Number of Pages: 148 Pages

10 USD

Tags: , , ,
  • Description

Description

Contents:
A- Foreword
1 – User Responsibility
1.1 – Owner’s Responsibility
1.2 – Employer’s Responsibility
1.3 – Trainer’s Responsibility
1.4 – Operator’s Responsibility
2 – Safety
2.1 – Safety Instructions
3 – Safety Inquiries
4 – Incident Notification
5 – Compliance
5.1 – Declaration Of Conformity
5.2 – Product Information
5.3 – Product Specifications
B- Familiarization
1 – General Safety
1.1 – Intended Use
1.2 – Decal Content
1.3 – Symbols And Colors
1.4 – Level Of Severity
1.5 – Symbols Legend And Definitions
2 – Models Description
3 – Primary Machine Components
3.1 – Layout
3.2 – Ground Control Box
3.3 – Platform Control Box
3.4 – Axle Extension Control Box
4 – Performance Specifications
4.1 – Technical Characteristics
4.2 – Working Area / Range Of Motion
5 – Decals And Markings Locations
C- Pre-Operation Inspection
1 – Recommendations
2 – Working Area Assessment
3 – Inspection And Functional Test
3.1 – Daily Inspection
4 – Safety Functional Checks
4.1 – E-Stop Button Check
4.2 – Activation Of Controls
4.3 – Fault Detector
4.4 – Automatic Engine Cut-Out
4.5 – Overload Sensing System
4.6 – Oscillating Axles
4.7 – Slope Warning Device
4.8 – Travel Speed Limitation
4.9 – Movement Speed
4.10 – On-Board Electronics
4.11 – Operating Temperature (For Russia And The Ukraine Only)
4.12 – Radius Limitation
4.13 – Axle Extension
4.14 – Drive Buzzer
4.15 – Boom Control System
D- Operation Instructions
1 – Operation
1.1 – Introduction
1.2 – Operation From The Ground Control Box
1.3 – Operation From The Platform Control Box
1.4 – Operation Of Overriding System From Ground Control Box
2 – Ground Control Box
2.1 – To Start And Stop The Machine
2.2 – Boom And Arm Controls
2.3 – Additional Controls From The Ground Control Box
3 – Platform Control Box
3.1 – To Start And Stop The Machine
3.2 – Drive And Steer Control
3.3 – Boom And Arm Controls
3.4 – Additional Controls
4 – Axle Extension Control Box
4.1 – Prepare The Machine
4.2 – Axle Extension Operation
4.3 – Axle Retraction Operation
5 – Link Piece Position Check
6 – Radius Limitation
6.1 – Principle
6.2 – Procedure
7 – Emergency Procedure
7.1 – In Case Of Power Loss
7.2 – To Rescue Operator In Platform
7.3 – No Power Available
8 – Transportation
8.1 – Putting In Transport Position
8.2 – Machine Layout
8.3 – Unloading
8.4 – Towing
8.5 – Storage
8.6 – Lifting Operation
9 – Cold Weather Recommendations
9.1 – Engine Oil
9.2 – Hydraulic Oil
9.3 – Preheating Operation
E- General Specifications
1 – Machine Dimensions
2 – Major Component Masses
3 – Acoustics And Vibrations
4 – Wheel/Tire Assembly
4.1 – Technical Specifications
4.2 – Inspection And Maintenance
5 – Options
5.1 – On-Board Generator
5.2 – Welder’s Kit
5.3 – Plumber’s Kit
5.4 – Glazier’s Kit
5.5 – Activ’ Shield Bar – Secondary Guarding System
F- Maintenance
1 – General
2 – Maintenance Schedule
3 – Inspection Program
3.1 – General Program
3.2 – Daily Inspection
3.3 – Periodic Inspection
3.4 – Reinforced Inspection
3.5 – Major Inspection
4 – Repairs And Adjustments
G- Other Information
1 – Warranty Disclosure
1.1 – After Sales Service
1.2 – Manufacturer’s Warranty
2 – Subsidiary Contact Information

Related Products