Hidromek Motor Grader HMK 230MG-5 Operation Maintenance Manual R23035401 EN

Description

Contents:
WARRANTY CONDITIONS
1. INTRODUCTION
1.1. GENERAL INFORMATION
1.2. CE, UKCA MARKING, DECLARATION OF CONFORMITY AND EMC DIRECTIVE
1.3. BEFORE STARTING OPERATION AND MAINTENANCE
1.4. INTENDED USE OF MACHINE
1.5. DIRECTIONS OF MACHINE
1.6. SAFETY INFORMATION
1.7. “CORRECT” AND “WRONG” MARKINGS IN SOME FIGURES
1.8. COPYRIGHT
1.9. DRIVING LICENSE
1.10. SPARE PARTS ORDERING PROCEDURE
1.11. LOCATION OF MACHINE AND ENGINE ID PLATES
1.12. TABLE TO ENTER SERIAL NO. AND DISTRIBUTOR INFORMATION
2. SAFETY
2.1. LOCATIONS OF WARNING LABELS AND DECALS
2.2. CONTENTS OF WARNING LABELS AND DECALS
2.3. GENERAL PRECAUTIONS
2.4. PRECAUTIONS BEFORE OPERATION
2.5. PRECAUTIONS DURING OPERATION
2.6. PRECAUTIONS DURING ROAD CONSTRUCTION
2.7. PRECAUTIONS AFTER OPERATION
2.8. PRECAUTIONS DURING SERVICE AND MAINTENANCE
2.9. GETTING ON OR OFF MACHINE
3. KNOW YOUR MOTOR GRADER
3.1. MAIN COMPONENTS AND PARTS
3.2. OPERATOR’S CAB
3.3. STEERING COLUMN
3.4. INSTRUMENT PANEL
3.5. MENU CONTENTS
3.6. SIDE CONTROL PANEL
3.7. SHIFTING GEARS
3.8. ACCELERATOR PEDAL
3.9. BRAKE PEDAL
3.10. INCHING PEDAL
3.11. TRANSMISSION CONTROL LEVER
3.12. PARKING BRAKE SWITCH
3.13. THROTTLE DIAL
3.14. CONTROL LEVER
3.15. OPERATOR’S SEAT
3.16. CO-OPERATOR’S SEAT (if equipped)
3.17. ADJUSTMENT OF SEAT BELT
3.18. ARTICULATION LOCK PIN
3.19. EMERGENCY EXIT
3.20. FIRST AID KIT
3.21. WINDOW WASHER FILLER CAP
3.22. STORAGE COMPARTMENT
3.23. SIDE WINDOWS
3.24. DOOR
3.25. DOOR FIXING MECHANISM
3.26. FIRE EXTINGUISHER (if equipped)
3.27. BATTERY DISCONNECT SWITCH
4. OPERATION
4.1. NEW MACHINE BREAK-IN
4.2. PRE-START INSPECTION
4.3. BEFORE STARTING ENGINE
4.4. COLD WEATHER START
4.5. CHECKING EMERGENCY STEERING SYSTEM
4.6. STARTING ENGINE
4.7. AFTER STARTING ENGINE
4.8. BEFORE MOVING THE MACHINE
4.9. MOVING THE MACHINE
4.10. CHANGING SPEED
4.11. OPERATING ON SLOPES
4.12. OPERATING ON ROUGH TERRAIN
4.13. OPERATING ON SNOW AND ICE
4.14. STOPPING THE ENGINE
4.15. AFTER STOPPING ENGINE
4.16. STOPPING MACHINE
4.17. PARKING MACHINE
4.18. EXHAUST AFTERTREATMENT SYSTEM
4.19. PRECAUTIONS FOR USING ATTACHMENT CONTROLS
4.20. OPERATING ADJUSTMENTS
4.21. SCARIFIER DIGGING ANGLE (if equipped)
4.22. SCARIFIER PENETRATION (if equipped)
4.23. RIPPERS AND TEETH OF REAR MOUNTED RIPPER ATTACHMENT (if equipped)
4.24. RIPPER INSTALLATION FACING UPWARDS (if equipped)
4.25. RIPPER TOOTH POSITION (if equipped)
4.26. CENTERSHIFT BRACKET
4.27. HIGH BANK CUTTING – LEFT SIDE
4.28. PREPARATION FOR ROAD TRIP
4.29. TOWING THE MACHINE
4.30. TRANSPORTATION
4.31. LIFTING THE MACHINE BY CRANE
4.32. SPECIAL SITUATIONS
4.33. LONG TERM STORAGE OF MACHINE
4.34. INSTRUCTIONS ON WITHDRAWAL FROM USE AND UTILIZATION
4.35. OPERATION AND MAINTENANCE OF AIR CONDITIONER
4.36. OPERATING TECHNIQUES
5. MAINTENANCE
5.1. GENERAL INSTRUCTIONS
5.2. PERIODICAL REPLACEMENT OF SAFETY- RELATED PARTS
5.3. PERIODIC INSPECTION OF SERVICE BRAKES
5.4. STANDARD TIGHTENING TORQUES FOR BOLTS AND NUTS
5.5. OIL, FUEL, COOLANT
5.6. PERIODICAL INSPECTION AND MAINTENANCE LIST
5.7. CHECKS BEFORE STARTING
5.8. EVERY 10 HOURS OR DAILY MAINTENANCE
5.9. INITIAL 50 HOUR MAINTENANCE
5.10. EVERY 50 HOURS OR WEEKLY MAINTENANCE
5.11. EVERY 250 HOURS OR MONTHLY MAINTENANCE
5.12. EVERY 500 HOURS OR 3 MONTHS MAINTENANCE
5.13. EVERY 1000 HOUR OR 6 MONTHS MAINTENANCE
5.14. EVERY 1500 HOURS MAINTENANCE
5.15. EVERY 2000 HOURS OR ANNUAL MAINTENANCE
5.16. EVERY 2 YEARS OR 3000 HOURS MAINTENANCE
5.17. EVERY 10000 HOURS MAINTENANCE
5.18. WHEN REQUIRED
6. TROUBLESHOOTING
6.1. ENGINE
6.2. CHASSIS
6.3. ATTACHMENTS
7. TECHNICAL SPECIFICATIONS
8. CONTACT INFORMATION
8.1. PLANT AND AFTER SALES SERVICES