Name: Krone Round Baler Vario Pack 1500 1800 Operation Manual
SKU: 478762
Availability: InStock

Krone Round Baler Vario Pack 1500 1800 Operation Manual 1

Krone Round Baler Vario Pack 1500 1800 Operation Manual 2

Krone Round Baler Vario Pack 1500 1800 Operation Manual 3

✓

Expert Support

✓

Full Speed

✓

100% Working

Krone Round Baler Vario Pack 1500 1800 Operation Manual

Size: 7.06 MB

Format: PDF

Language: English

Brand: Krone

Type of Machine: Round Baler

Type of Manual: Operation Manual, Electrical Schematic

Model: Krone

Vario Pack 1500

Vario Pack 1500 MultiCut

Vario Pack 1800

Vario Pack 1800 MultiCut

Machine No: 540680

Number of Pages: 138 Pages

20 USD

Tag: Krone Agricultural & Tractor Manual

Description

Description

Contents:
1 General Information
1.1 Intended Operation
1.2 Technical Data
2 Safety
2.1 Identifying Safety Instructions in the Operating Manual
2.2 Safety Instructions and Accident Prevent Regulations
2.3 Introduction
3 Before and After Use
3.1 Commissioning
3.2 Hitching
3.3 Road Driving
3.4 Unhitching
4 Operation
4.1 Adjustments Before Starting Work
4.2 Forward Speed and PTO Speed
4.3 Filling the Bale Chamber
4.4 Wrapping and Depositing Bales
4.5 After Baling
4.6 Splashguard
4.7 Rotor reversing device
5 Basic Settings and Operation
5.1 Pick-Up
5.2 Baffle Plate
5.3 Cutting System (MultiCut)
5.4 Select baling pressure
5.5 Adjusting baling diameter
5.6 Attaching and Detaching the Bale Ejector
5.7 Floor Conveyor Chain
5.8 Twine and Net Wrapping / Twine Wrapping
5.9 Net Wrapping
5.10 Bale Counter
5.11 Central Chain Lubrication Device
6 Mechanical bale size indicator
6.1 Adjustments
7 Control unit Basis (Electric twine starter)
7.1 General Information
7.2 Preparing for Use
7.3 Operation
8 Control unit Medium (Electro-Hydraulic)
8.1 General Information
8.2 Preparing for Use
8.3 Operation
8.4 Sensor Test
8.5 0-Blade position
9 Control unit Comfort
9.1 General Information
9.2 Mounting
9.3 Control Panel
9.4 Ready Status
9.5 Basic Setting
9.6 Operation
9.7 Bale Counter
9.8 STOP Key
9.9 Error Messages
9.10 Alarm Messages
9.11 Sensor Test
8.12 0-setting of the baling pressure indicators
9.13 Language Setting for the Comfort Controls
10 Maintenance
10.1 Adjustments
10.2 Adjusting the Sensors
10.3 Maintenance Tasks
10.4 Drive Chains
10.5 Hydraulic System
10.6 Drawbar Ring Hitch
10.7 Cleaning Tensioning Arm
10.8 Shortening the floor conveyor chains
10.9 Sharpen Cutting System Blades
10.10 Maintaining the Compressed Air Brake System (Special Equipment)
10.11 Lubrication
11 Winter Storage
11.1 General Information
12 Return to Service
12.1 General Information
12.2 Vent Overload Coupling on the PTO Shaft
13 Faults – Causes and Remedy
13.1 General Faults, Causes and Remedy
13.2 Faults, Causes and Remedy in the Central Chain Lubrication Device
13.3 Error Messages for the Control unit Comfort
A1 Commissioning
A1.1 Preparing for Commissioning
A1.2 Assembling the Bale Ejector
A1.3 Adjusting Drawbar Height
A1.4 Attaching the PTO Shaft
A1.5 Attaching the Hose Bracket
A1.6 Lighting System
A2 Electrical Circuit Diagram