Kubota Excavator KX057-4 U55-4 Operators Manual RD368-8125-5

Description

Contents:
Dealer Service
Technical Data
Description Of Machine Parts
Instrument Panel And Control Elements
Checks Before Start
Daily Checks
Checking The Devices
B Starter Switch
B Display Selector Switch
B LCD Display For Normal Operation
B Warning Lamp
B LCD Display For Warning
B Setting The Clock
B Reordering The Year/Month/Day And Changing The Am/Pm System To The 24- Hour One
B Log Record
B Periodic Check
B If All The Check Points Are Not Displayed At A Glance On A Single Screen
B When The Check-Up Is Completed
B Horn Switch
B Light Switch
B Aux Port Flow Rate Limit Switch
B Auto Idle Control Switch
B Throttle Potentiometer
B Travel Speed Switch
B Inhibit Diesel Particulate Filter (DPF) Regeneration Switch
B Beacon Light Switch
Eco Mode
Cab Type Machines
B Wiper/Washer Switch
B Interior Lamp
B Heater Switch
B Opening/Closing Of Cab Door
B Opening/Closing Of Front Cab Window
B Opening/Closing Of Side Cab Window
B Emergency Hammer
Air Conditioner
B Air Flow
B Air Control Vent
B Control Panel
B Operation
Handling The Safety Devices
B Pilot Control Lock Lever
Operation Of The Engine
Starting The Engine
Starting The Engine Under Cold Conditions
Starting With An Auxiliary Battery
B Observe Following Guidelines When Starting With An Auxiliary Battery
Check Points After Starting The Engine
Stopping The Engine
B Engine Stop Button
B Precautions In Case Of Overheat
B DPF Regeneration
Excavator Operation
Running-In Of The New Excavator
B Do Not Work With Full Engine Rpm’s Or Full Loads During The First 50 Working Hours
B Oil Change In The Run-In Stage
B Adjusting The Operator’s Seat
B How To Use The Seat Belt
Starting
B Pilot Control Lock Lever
Driving
B Drive Levers (Right,Left)
Turns
B Pivot Turn
B Spin Turn
Up And Downhill Driving
Parking On A Slope
Operation Of The Dozer
Two Pattern Selection System (TPSS)
B Pattern Change
Operation Of The Boom
Operation Of The Arm
Operation Of The Bucket
Swivel And Boom Swing Operation
B Swivel Operation
B Boom Swing Operation
Auxiliary Port Operation
B Selecting The Action Modes
B Aux Port Handling Procedure
B Setting The Maximum Flow Volume
B How To Resume The Aux Setting While Processing The DPF Regeneration
How To Release Pressure Trapped In The Hydraulic System
Angle Blade Operation
1-Way Or 2-Way Circuit Selection Valve Operation
Boom Lowering Valve
Auto Idle (Ai) Operation
Anti-Theft Device (For Canada Only, If Equipped)
B Anti-Theft Device
Important Information On Excavator Operation
Transporting The Excavator On A Vehicle
Lifting Of The Excavator
Maintenance
Maintenance Intervals
Opening And Closing Of Covers
B Opening/Closing Of The Engine Hood
B Opening/Closing Of The Side Cover
B Where To Store The Tool
B Cup Holder
B Where To Store The Grease Gun
B Where To Keep Operator’s Manual
Daily Checks
B Checking Coolant Level
B Checking Fuel Level
B Checking Engine Oil Level
B Checking Hydraulic Oil Level
B Checking V-Belt
B Checking Radiator And Oil Cooler
B Checking Washer Liquid
B Checking And Cleaning Engine And Electrical Wiring
B Washing Whole Machine
B Greasing Front Attachments (Without Bucket Pin And Boom Swing Fulcrum)
B Greasing Bucket Pin And Bucket Link Pin/ Angle Pin And Angle Cylinder Boss
B Greasing Boom Swing Fulcrum
Regular Checks And Maintenance Work
Every 50 Service Hours
B Draining The Water From The Fuel Tank
B Draining Water Separator
B Battery
B Battery Charging
B Greasing Swivel Bearing Teeth
Every 200 Service Hours
B Adjusting V-Belt Tension
B Checking Radiator Hoses And Clamps
B Grease Swivel Ball Bearing
B Inspection And Cleaning Air Filter Element
B Air Filter Maintenance
B Cleaning Evacuator Valve
B Checking Diesel Particulate Filter (DPF) Muffler
B Checking Fuel Line And Intake Air Line
Air Conditioner
B Cleaning Air Filter
B Checking Air-Conditioner Condenser
Every 250 Service Hours
B Replacing Water Separator Filter Element
Every 500 Service Hours
B Changing Engine Oil (Change The Engine Oil Every 500 Hours, Or Every 1 Year In The Case That Service Hour Is Less Than 500 Hours)
B Replacing Engine Oil Filter Cartridge (Replace The Engine Oil Filter Cartridge Every 500 Hours,Or Every 1 Year In The Case That Service Hour Is Less Than 500 Hours)
B Drive Unit Oil Change(First Oil Change Of The 50 Hours)
B Replacing Fuel Filter Cartridge
B Replacing Breather Filter
Every 1000 Service Hours
B Replacing The Hydraulic Pilot Filter Element
B Replacing Hydraulic Return Filter
B Hydraulic Oil Change (Including Replacing Of The Suction Filter In The Hydraulic Tank)
B Hydraulic Oil Check With Hydraulic Hammers
B Checking Engine Valve Clearance
Every 1000 Service Hours Or Once A Year
B Replacing Air Filter Element
Every 1500 Service Hours
B Checking Injector Tip
B Replacing Oil Separator Element
B Checking EGR Cooler
Every 2000 Service Hours
B Changing Front Idler And Track Roller Oil
B Checking The Alternator And Starter Motor
Every 3000 Service Hours
B Checking EGR System
B Cleaning Diesel Particulate Filter (DPF)
Annual Servicing
B Checking Air-Conditioner Pipes And Hoses
B Checking Exhaust Manifold (Cracks, Gas, Leakage And Mounting Screw)
B Checking Intake Air Line For Air Leaks
B Checking Boost Sensor And AFS (Air Flow Sensor)
B Checking Condition Of Diesel Particulate Filter (DPF) Muffler
B Checking Diesel Particulate Filter (DPF) Differential Pressure Sensor And Piping For Gas Leak
B Checking Diesel Particulate Filter (DPF) Exhaust Gas Temperature Sensor
B Checking EGR Piping For Gas Leak
Biennial Servicing
B Replacing Air-Conditioner Pipes And Hoses
B Replacement Of Radiator Hoses And Hose Clamps
B Changing Radiator Coolant
B Replacing Fuel Hoses And Hose Clamps
B Replacing Intake Air Line
B Replacement Of Oil Separator Rubber Hose
B Replacement Of Diesel Particulate Filter (DPF) Differential Pressure Sensor Rubber Piping (Front And Back)
B Replacement Of Suction Pipe Downstream The AFS (Air Flow Sensor)
B Replacement Of Boost Sensor Pressure Rubber Piping
B Replacement Of EGR Cooler Hose
Servicing As Required
B Checking Amount Of Refrigerant (Gas)
B Draining The Fuel Filter
Other Adjustments And Replacements
Purging Of The Fuel System
Adjustment Of Tracks
B Special Information When Using Rubber Tracks
Changing The Bucket
Fuses
B Replacing Fuses
B Fuse Capacities And Circuits
B Auxiliary Electric
B Slow Blow Fuse
Troubleshooting
Operation Under Cold Weather Conditions
Preparation For Operation In Cold Weather
Procedure After Done Work
Long Storage
Recommended Oils
Biodiesel Fuel (BDF)
Request Regarding Fuel Use And Maintenance Of CRS Diesel Engines
Appendices
Main Dimensions
Lifting Capacity
List Of Screens
List Of Normal Screens
Navigation List Of Screens
Automatic Diesel Particulate Filter (DPF) Regeneration
Locking And Releasing The Diesel Particulate Filter (DPF) Regeneration