Expert Support
Full Speed
100% Working
PowerBoss Scrubber Phoenix 28 30 33 Instruction Manual 88-10-3001
10 USD
- Description
Description
Contents:
Introduction
Preface
Notes on warranty
Acceptance of the machine
1 Safety information
1.1 Safety and Warning Symbols
1.2 General Provisions
1.3 Provisions for Operation
1.4 Maintenance instructions
1.5 Specific Hazards
1.6 Information for Protection of Environment
1.7 Labels at the Machine
2 First Operation
2.1 Instruction
2.2 Initial charging procedure
2.3 Before Putting into Operation
2.4 Start Machine
2.5 Operation
2.6 Stop Machine
2.7 After Work
2.9 Tie-down points
3 Operation
3.1 Method of operation
3.1.1 Brush Deck
3.1.2 Solution Tank
3.1.3 Squeegee
3.1.4 Recovery Tank
3.1.5 Travel Drive
3.1.6 Batteries and Charger
3.1.7 Options
3.2 Operating and Indicating Elements
3.2.1 Operating Panel
3.2.2 At the machine
4 Technical Data
5 Maintenance and Care
5.1 PowerBoss System Maintenance
5.2 Maintenance Document
5.3 Maintenance Schedule
5.4 Battery Systems
5.4.1 Charge Batteries
5.4.2 Low Discharge Signal sender (LDS)
5.4.3 Maintenance of Drive Batteries
5.4.4 Remove Batteries
5.4.5 Install Batteries
5.4.6 Disposal of Batteries
5.5 Solution Tank
5.5.1 Fill Solution Tank
5.5.2 Empty Solution Tank
5.5.3 Clean Solution Filter
5.6 Recovery Tank
5.6.1 Empty Recovery Tank
5.6.2 Clean Recovery Tank
5.6.3 Clean Suction Filter
5.7 Disc brush deck
5.7.1 Clean Brushes
5.7.2 Change Brushes
5.7.3 Change Deflector Roller
5.7.4 Change Sealing Strip
5.8 Cylindrical brush deck
5.8.1 Clean dirt hopper
5.8.2 Remove brushes
5.8.3 Clean brushes
5.8.4 Fit brushes
5.8.5 Change deflector roller
5.9 Squeegee
5.9.1 Cleaning the Squeegee
5.9.2 Changing the Sealing Strips
5.9.3 Adjusting the Sealing Strips











